Titan Mechanical Services is a leading service provider in the water treatment industry, offering a comprehensive range of remedial works services associated with mains conversions.
A mains conversion is often used to resolve water hygiene related compliance issues. For instance, when a Legionella risk assessment flags up a cold-water storage tank for refurbishment or replacement, a mains conversion is increasingly seen as the preferred option due to its relatively low cost and the risk reduction benefits associated with Legionella control.
Additionally, a mains conversion is also used to resolve low pressure issues in hot water systems that are being supplied from an older cylinder or water heater.
To put it simply, a water mains conversion is the removal of a cold-water storage tank from the distribution system. This leaves the mains to feed the other critical assets directly. Pressure Reducing Valves - also known as RPV's - are then installed on the cold-water feed to both hot and cold distribution systems. Often, this is combined with the installation of a new unvented hot water cylinder or water heater.
A water mains conversion for hot and cold-water supplies has a number of benefits and often delivers a much better performance.
Efficient and Effective - Once converted, the flow of hot water will be similar pressure to the cold-water supply and you'll be able to have multiple taps, showers, washing machines, dishwashers and more running at the same time without noticing a difference in the flow.
Compliance - By removing the unnecessary storage of cold water from the system, you significantly reduce the risks of Legionella proliferation, and that of other waterborne organisms.
Quantity - Old hot water cylinders usually hold smaller amounts of water and at a lower pressure. Modern hot water cylinders typically hold much more fluid at high pressure.
Minimise Space - A water mains conversion reduces the need for large storage tanks, which can take up lots of valuable loft space.
Less equipment - There's no need for booster pumps to generate high pressure.
Why not consider moving to a mains pressure hot water system today and begin enjoying the benefits of a strong, consistent flow of hot water while avoiding any nasty changes in temperature when someone else turns the hot tap on...
Cold water is usually only stored in circumstances where:
However, it's not unusual for cold water storage tanks to be removed and outlets fed directly from the mains. Typically, where buildings are over 20 years old and where original cold-water storage tanks are in bad condition, it is often cheaper and easier to make these systems redundant and begin the process of switching them to the mains.
The easiest way to determine whether you have low or unequal pressure in your water flow is to look at the hot water cylinder. Typically, if your water cylinder and heating system are more than 20 years old, it's likely that they will be the cause of your low-pressure issue.
Strictly compliant - Titan Mechanical ensure that all Legionella remedial works are based on the requirements of BS 8558:2015 & BS EN 806 parts 1-5 and comply with The Water Supply Regulations 1999 to ensure your water system adheres to all health and safety guidance and best practice.
Experience- Our team of experts have over 50 years of combined experience, bringing a thorough knowledge of the industry and unrivalled expertise in dealing with a variety of water systems.
Additional services- In addition to the planned remedial work and water system maintenance, we also carry out tank refurbishment and tank reline services that are cost effective and completed to a very high standard.
Nationwide coverage- With a Head Office based near Liverpool, we have teams working up and down the country and have the capacity to carry out Legionella remedial works in the South and South East England, North West, Midlands, South East England, and Wales, North, North East, and Scotland.
Our team of experts have over 50 years of combined experience, bringing a thorough knowledge of the industry and unrivalled expertise in dealing with a variety of water systems.
We are proud to have been accredited to the highest standard for all our services. Please [visit our homepage - link] to see a full list of accreditations.
In addition to the planned remedial work and water system maintenance, we also carry out [tank refurbishment and tank reline (please link to tank reline page on all pages] services that are cost effective and completed to a very high standard.
With a Head Office based near Liverpool, we have teams working up and down the country and have the capacity to carry out Legionella remedial works in the South and South East England, North West, Midlands, South East England, and Wales, North, North East, and Scotland.
Tell us more information about your water treatment requirements for a quick quote
Titan Mechanical Services deliver all works in line with current best practice and applicable British standards.
Call 01704 335800 to speak to our expert team.